User's Manual

II.Operation instruction
1.Aim the LED indicator on remote sensor at TV.
The remote range is 3-10m.
2.When you press one of the function key on remote sensor
straightly(raise,lower,left,right,up,down),the mount will
move to the direction you expected.Loosening,the mount
will stop.
3.Insert one 23A,12Vbattery in the remote sensor.
If the battery ran out,please open the back cover
of the sensor and put in the new one.
2.Take out the power
plyg from carton.Insert
one end to TV cart and
other end to power supply.
3. Connect power and press”Down”key on the remote
sensor to let the cart pitch to horizontal position.Insert
square tube into conjunctive bracket and fasten them
by round head screw and M6*15mm half round head
screw.Hang TV bracket on square tube and fasten by
round head screw.(see the diagram)
7
7
Note:
Please fasten the power plug
or placed it to appropriate place
B.Remote sensor:
(Horizontal position)
7.V.p.:one push to extend cart to the programmed operating
position automaticall(vertical position0)。
8.H.P.:one push to back cart to the programmed storage
position automatically。
TV bracket
square tube
NOTE:Keep the edge of conjunctine
bracket to the stamped line on square tube
Half round
head screw
Round head
screw
Stamped line
7
M6*15mm
M6*18mm
1.Raise:hold on to raise cart。
2.Lower:hold on to lower cart。
3.Left:hold on to turn TV left。
4.Right:hold on to turn TV
right。
5.UP:hold on to pitch TV up。
6.Down:hold on to pitch TV
down。
.Key function
LED
Indicator
Lower
Cart
Pitch
Down
Turn Right
Raise Cart
Pitch Up
Turn Left
Virtical
Position
Horizontal
Position
I
Lower Cart
Pitch D own
Turn Right
Raise Cart
Pitch Up
Turn Left
Virtical
Position
Horizontal
Position