User's Manual

ManualsBrandsZhan Xiang Technology ManualsElectronicsFlat Panel Bracket R/C Transmitter

USER GUIDE

Model:ZX-A04A

Length:706 mm

Width:232 mm

Height:1042 mm

1.Specification

1-1.D imensions

1-2.I nstallation Parts:

Remote Sensor

Pencil

Cross

screwdriver

Wrench

Hammer

Pecussion borer

11MM

14MM

1-3.Assembly tool(Not included):

2 m

2mm

2pcs

Pad

Do not touch or push the

product by hand or other

object when it is working .

Check carefully to make

sure every parts are

fastened tightly before use.

4. Temperature and humility condition:

-20℃ ~ +50℃ , 80%HR

3-5.Maintenance

Do not use corrosive agent or alcohol or chemical cloth

to clean!

1.Do not disassemble the product to repair by yourself .

Warranty for electricity is void after disassembled!

2.After you installed the apparatus,please check the exp-

ansion screws and all fastening devices every 3months,

and please do not use it and contact the local dealer if it

gets loose,rusty or lost.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)this

device may not cause harmful interference,and (2) this

device must accept any interference received,including

interference that may cause undesired operation.

1.Do not disassemble the product to repair by yourself .

Warranty for electricity is void after disassembled

2.After you installed the apparatus,please check the exp-

ansion screws and all fastening devices every 3months,

and please do not use it and contact the local dealer if it

gets loose,rusty or lost.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)this

device may not cause harmful interference,and (2) this

device must accept any interference received,including

interference that may cause undesired operation.

Warning:Warning:

Http://www.xyz888.com.cn

Mail : mail@xyz888.com.cn

M5/M6/M8(mm)

Round head screw

M5*23/M6*25/M8*30

(mm)

Sink head screw

M5*25/M6*30/M8*35

(mm)

16*6.2*T1.5/

16*8.4*T1.6(mm)

Washer

Tab

M5/M6/M8(mm)

Expansion screw

8pcs

Round head screw

Remote sensor

5pcs

1pcs

M8*70mm

M6*18mm

Summary of content (5 pages)

PAGE 1
, X Do not touch or push the product by hand or other object when it is working . Check carefully to make sure every parts are fastened tightly before use. USER GUIDE Model: ZX-A04A 1.Specification 23 1-1. D imensions 2m m Length: 706 mm Width: 232 mm Height:1042 mm 3-5.Maintenance Do not use corrosive agent or alcohol or chemical cloth to clean! 1042mm 4 . Temperature and humility condition: - 20℃ ~ + 50℃ , 80%HR Warning: 1.Do not disassemble the product to repair by yourself .
PAGE 2
.Electric Specification 2-1.Input Voltage/Current/Frequency: 100-240VAC, < 1.2A,50/60Hz Output Current: DC24V ,3A 2-2.Motor Motor Item Rated Voltage Current (No load) ≦0.7A Current (Rated load) ≦1.8A DN3435-3825E DC24V DN3435-3046E DC24V PR545AG-16190-RB35C-1000 DC24V Operation temperature -20℃~50℃ ≦0.5A ≦1.5A -20℃~50℃ ≦0.3A ≦0.
PAGE 3
B. Remote sensor : I .Key function LED Indicator Lower Cart Raise Cart Turn Left Pitch Up Virtical Position Raise Cart Lower Cart Turn Left Turn Right Pitch Up Pitch Down Virtical Position Horizontal Position Turn Right Pitch Down Horizontal Position 1.Raise:hold on to raise cart。 2.Take out the power plyg from carton.Insert one end to TV cart and other end to power supply. 2.Lower:hold on to lower cart。 3.Left:hold on to turn TV left。 4.Right:hold on to turn TV right。 5.
PAGE 4
.Fasten 2 tab on the upper end of TV back panel by 1 sink head screw.Check fastness,then hook TV on the cart’s TV bracket.(see the diagram) 3-2.Operating Instruction. Diagram a A.Function Using remote sensor can turn TV left or right to angel 35°, and pitch up or down to 90°angel (vertical or Turn Left 35° Turn Right 35° horizontal),lower length is350mm. Ra is e Ca rt Lo we r Ca rt Tur n Le ft Tur n Ri gh t Pi tc h Up Pi tc h Do wn Virt ic al Po si ti on Ho ri zo nt al Po si ti on 5.
PAGE 5
Zhan Xiang Technology (Hui Zhou) CO., LTD Flat Panel TV Bracket Page 19 FCC ID:V26PX-T70331 NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.