User's Manual

3-1. Installation Method:
1.Install elevating stand on the base plate by fastening M6X10mm scr-
ews,then fix the wall mounting rack and reinforce plate to elevating stand
and base plate by M6X10mm screws.(see diagram 1)
8
8
3.Installation Instruction
Diagram 1
M6*10mm
Base plate
Plug in power cord
connector under the
base plate
Reinforce plate
Elevating stand
Wall mounting rack
2.Move the assembled parts to installation position and mark screw
hole locations to be drilled,use electric drill to drill holes on the wall at
marked locations to 75mm depth, 10mm and drill holes on the ground at
marked locations to 60-70mm depth, 10mm; then put plastic wall plug
into the holes(4- 10mm) on the ground.(see diagram2)
5
2- 10mm
4- 10mm
Diagram 2
10.0
6
0
~70MM
MM
MM
MM
Φ
7.Hook TV on the TV rail, centerize TV, then screw up the screws on TV
bracket to fasten up TV tightly. Use the wire saddle to fix the power
cord of TV.(see diagram 7)
A.Function:
3-2.User’s Guide
This product has
remote control and
manual control,they
can control elevating
stand to move 640mm
from up to down.
(see diagram 8)
Power plug
Manual control
2 PE O P LE LIF T T H E
AS S E MBLY U N I T.
Di agram 7
Wire saddle
Wire saddle
Power cord
of TV
The screw
to fasten
TV
Manual control
Di agram 8
Ex en
in
64
0
m
t d g m