User Guide

www.ihomeangel.com
[phone] Working hours : Mon  Fri 9:00 a.m.  16:00 p.m. EST
[e-mail]
Page:  2  / 4
TOOLS REQUIRED (NOT INCLUDED):
Before starting assembly and installation please prepare the needed tools as below picture
PARTS TYPE & QTY INCLUDING:
(A) Mounting plate assembly (1)
(B) Green ground screw (1)
(E) Canopy (1)
(F) Strain relief (2)
(G) Ball knob (2)
(H) Cord (1)
(I) Stem (1)
(J) Cover (1)
(K) Socket (1)
(L) Glass shade (1)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that
all parts and accessories are included as shown in the
above illustration.
2. Turn off power
Before you start the installation, NEVER attempt any work
without shutting off the electricity until the work is done.
ACCESSORIES & QTY ENCLOSED:
(C) Plastic Wire Connector (3)
(D) Mounting screw (2)
(M) Allen wrench (1)
» Go to the main fuse, or circuit breaker, box in your home.
Place the main power switch in the “OFF” position.
» Place the wall switch in the “OFF” position.
3 »
Unscrew ball knobs (G) from canopy (E) then gently
remove mounting plate assembly (A).