Use and Care Manual

Step 1: Place part #J/C/J1 on the bottom

frame(A6&A4), using 7 screws 1# and gaskets to ﬁx.

Step 2: Use 4 screws 9# and gaskets to install

2 part#（H5+H6）with part#C & J, then put on

the plastic caps as shown in ①/③.

Repeat the above procedures to assemble the

another side as shown in ②④

Step 3: Use 4 screws 9# and gaskets to installe 2 part#（H4+H3）with part#C & J1,

then put on the plastic caps as shown in ③/④.

Step 4: Use 4 screws 9# and gaskets to installe 2 part#（H4+H3）with part#J1,

then put on the plastic caps as shown in ⑤.

Front Side

Back Side

Side View

Section View

Plastic Cap