Use and Care Manual

Step 3: Place part#J on the bottom frame(A6), using 3 screws 1# and gaskets to ﬁx.

Repeat the above procedures to assemble the another side.

Step 4: Fix the part #C3 to the part #C1(C2) with 2 screws 3#, 2 gaskets and nuts

each as shown in ③④.

Attention:To ensure the stability of the wall panel(J) during assembly,

you can temporarily reinforce this position(☆) with screws 2#,

and replace it with other correct screws

when the next installation is made.

Inside ViewInside View