Datasheet

16 A SPDT MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• 16 Amp switching
• High Inrush version (80 A) available
• AC and DC coils
• Isolation spacing greater than 10 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211
• VDE file 40006031
ZETTLER electronics GmbH
Fax [phone] www.ZETTLERelectronics.com
[e-mail] 0 97 800 89 +49 Tel.
Germany Puchheim, D-82178 Junkersstrasse 3,
2007-02-27
AZ762
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 10
7
Electrical 1 x 10
5
at 16 A 250 VAC Res.
Operate Time (typical) 7 ms at nominal coil voltage DC coils
10 ms at nominal coil voltage AC coils
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation 1000 megohms min. at 20°C
Resistance 500 VDC 50% RH
Insulation C250
(according to Overvoltage category: III
DIN VDE 0110, Pollution degree: 3
IEC 60664-1) Nominal voltage: 250 VAC
Dropout DC coils Greater than 10% of nominal coil voltage
AC coils Greater than 15% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 85°C (185°F) DC coils
-40°C (-40°F) to 70°C (158°F) AC coils
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 0.062" (1.5 mm) DA at 10–55 Hz
Shock 10 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 Seconds
Weight 14 grams
Packing unit in pcs 20 per plastic tube / 1000 per carton box
CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A)
Ratings Resistive load:
Max. switched power: 480 W or 4432 VA
Max. switched current: 16 A
Max. switched voltage: 150 VDC* or 440 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR 16 A at 277 VAC resistive, 100k cycles [3]
16 A at 277 VAC resistive, 50k cycles [1]
1 HP at 250 VAC (1 Form A) [1]
1
/
2
HP at 125 VAC (1 Form A) [1]
TV-5 at 125 VAC (1 Form A) [1]
16 A at 277 VAC resistive, 75k cycles [2]
B300 Pilot Duty [2]
R300 Pilot Duty [2]
VDE 16 A at 250 VAC resistive, [1] [2] and [3]
9 A at 250 VAC, inductive (Form A) [1] [2] and [3]
Material Silver cadmium oxide [1] or silver tin oxide [2]
or silver nickel [3]. Gold plating available
Resistance < 50 milliohms initially
COIL
Power
At Pickup Voltage 200 mW (DC coil)
(typical) .422 VA (AC coil)
Max. Continuous 1.7 W at 20°C (68°F) ambient
Dissipation 1.7 VA at 20°C (68°F) ambient
Temperature Rise 26°C (47°F) at nominal coil voltage
Max. Temperature 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
NEW !!!
High inrush version 80 A !!!