Datasheet

NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage 113 mW
(typical)
Max. Continuous
Dissipation 338 mW at 20°C (68°F) ambient
Temperature Rise 40°C (104°F) at nominal coil voltage
Temperature Max. 105°C (221°F)
CONTACTS
Arrangement SPST (1 Form A)
Ratings Resistive load:
Max. switched power: 150 W or 1250 VA
Max. switched current: 10 A
Max. switched voltage: 30 VDC or 277 VAC
Rated Load 10 A at 125 VAC, Res., 100k cycles, 90°C
10 A at 30 VDC, Res., 100k cycles, 90°C
5 A at 250 VAC, Res., 100k cycles, 90°C
1/10 HP at 250 VAC, 100k cycles, 85°C
1.4 FLA / 7.5 LRA at 250 VAC, 100k cycles, 85°C
Material Silver nickel
Resistance < 100 milliohms initially
(at 6 V, 1 A, voltage drop method)
UL / CSA
AZ9375
6/27/12
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint
• Thin vertical profile only 0.275" (7 mm) wide
• Dielectric strength 4000 Vrms
• Type ‘F’ 155°C wire standard
• 10 Amp switching capability
• UL, CUR file E44211
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 5 million operations
Electrical 1 X 10
5
at 5 A, 250 VAC Res.
Operate Time (typical) 10 ms at nominal coil voltage
Release Time (typical) 4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 750 Vrms between open contacts
(at sea level for 1 min.) 4000 Vrms coil to contact
Insulation 1000 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -30°C (-22°F) to 85°C (185°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 0.062" (1.5 mm) DA at 10–55 Hz
Shock 10 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 4 grams