Specifications

343
ZlinkW Command Reference
When you type the traffic command, or select the “Traffic” option from the ZbaseW
menu, the first line displayed may read “
- ... data lost ...”. This is simply
indicating that some traffic logging was not seen by you. If this message is displayed
while you are in traffic it indicates that the system is performing log postings faster than
the traffic command can display them. The postings are not lost; they simply are missed
by the traffic display. This may occur and busy systems when viewing traffic over the
modem connection.
+ traffic
- ... display overrun ...
0256 page sent 12:10:59p 2 6AL 1|00S P1 00000256 D 1 7
0263 page sent 12:11:02p 2 6AL 3|00S P1 00000263 D 1 7
0263 page sent 12:11:02p 2 6AL 2|00S P1 00000263 D 1 7
0263 page sent 12:11:03p 2 6AL 1|00S P1 00000263 D 1 7
0777 owner succeeded 12:12:03p 1 6AL
0777 page sent 03:12:46p 1 6AL 2|15S 2 000 P123
0777 page sent 03:12:46p 1 6AL 1|00S 2 000 P123
The next set of log entries, or traffic reports, is a set of pages from a serial port access.
Note that as there is no number called to start the transaction the subscriber ID is posted as
*modem*; however the individual pages resulting from alpha pages have their subscriber
numbers posted. The alpha pages were done on the “A” port of a octal serial interface card
addressed as card 8, the source is posted as “8AA” with the second “A” representing the
“Alpha” mode of this input device.
*modem* alpha # in prgrs 12:13:26p * 8AA
0777 page sent 12:13:35p 1 8AA 1|00S 2 000 P123
0777 page sent 12:13:35p 1 8AA 2|15S 2 000 P123
0006 page sent 12:13:38p B 8AA 1|00S 5 00054321
0004 page sent 12:13:45p 3 8AA 1|00S P0 00910263 D 1 4
0004 page sent 12:13:45p 3 8AA 1|00S P0 00910263 D 1 4
0003 page sent 12:13:48p 2 8AA 1|00S P0 00910263 D 1 3
0003 page sent 12:13:49p 2 8AA 1|00S P0 00910263 D 1 3
0002 page sent 12:13:52p 1 8AA 1|00S P0 00910263 D 1 2
0002 page sent 12:13:53p 1 8AA 1|00S P0 00910263 D 1 2
*modem* alpha # in done 12:14:01p * 8AA total of 6 transactions
0001 page sent 12:14:28p 0 8AA 1|00S P0 00910263 D 1 1
0001 page sent 12:14:28p 0 8AA 1|00S P0 00910263 D 1 1
The following is a modem call to an alpha access number, marked with status “A” in
ZbaseW. Note that this is very similar to the transaction on a serial card, except that the ID
number is used instead of
*modem* and that the transaction source type is “L” for “LIU”
instead of “A” (Alpha).
0555 alpha # in prgrs 12:15:25p 0 6AL
0002 page sent 12:15:44p 1 6AL 1|00S P0 00910263 D 1 2
0002 page sent 12:15:45p 1 6AL 1|00S P0 00910263 D 1 2
0001 page sent 12:15:45p 0 6AL 1|00S P0 00910263 D 1 1
0001 page sent 12:15:46p 0 6AL 1|00S P0 00910263 D 1 1
0555 alpha # in done 12:15:53p 0 6AL total of 2 transactions
ZlinkW “vls”
(Show the contents of the voice file directory)
This command outputs a listing of the files resident in the voice portion of the fixed disk.
Files with names beginning with the “&” character are temporary files; temporary files are
created and deleted as voice pages are processed by the paging terminal.