Specifications

95
Station Transponder Unit Configuration
ID
This parameter is a number between 1 and 4. It identifies the specific relay output used on
the power supply/relay board of the Station Transponder Unit.
Use the down arrow at the right to open a drop-down list and select the correct number.
For more information on how the relay outputs are numbered and how to connect them,
see Relay Connections (P1-P4) on page 154.
Unit Definition Settings
Figure 34: Station Units Window
Name
This is the name that the system uses internally to identify this operational unit. The name
can be from 1 to 30 characters in length and contain both letters and numbers. The name
cannot contain any spaces; however, periods (.) and underscores ( _ ) are allowed. If a
CAD interface is used, this name label will be used in the CAD messages.
Display Name
This is the name that is used on the buttons displayed on the FSA Console user interface.
The name can be from 1 to 30 characters in length and does support the use of spaces.
Note Actually, only the first four relays, native to the power supply/relay
board in the Station Transponder Unit, are functional. The relays
numbered 5 through 10 refer to a discontinued external relay
option, which is no longer available.