Specifications

Configuring Station Transponder Units
62 025-9581M
10. (Optional) Entering a “2” at the top menu opens the Alerts menu. This menu is
used to determine what kind of audible alert tone the Station Transponder Unit
plays in response to an incoming alert for a particular unit (or the station). In
addition, you can configure a unit energize a relay based on receiving an alert and
to reset a relay based on the activation of a sense input. For more information about
the options in this menu, see “Alerts” Menu on page 67. When you have finished
in this menu, type “e” to return to the top menu.
11. (Optional) Entering a “3” at the top menu opens the Relays menu. From this menu
you can select an individual relay and configure the manner in which the relay gets
reset. For more information on the reset options, see “Relays” Menu on page 69.
When you have finished in this menu, type “e” to return to the top menu.