Specifications

Serial Port Programming

7. Press “4” to open the Communication Mode menu and “4” again to set the

Communication Mode to COR, TX on COR Low. Press “e” to return to the

Station Configuration menu.

8. Enter a “5” and set the keyup delay to 0.10 seconds (for a system using VoIP, if the

system uses radio to handle voice you will need to set this delay longer). When you

are finished, enter “e” to return to the top menu.

9. From the top menu, enter a “5” to open the PA Options menu. Confirm that the

number “3” option, PA Un-Muted Mode, is Enabled. Enable it if necessary.

When you are finished, enter an “e” to return to the top menu.

Note The options and settings available from this menu are not available

in the FSA Maintenance Utility. If you intend to use these

capabilities of the Model 6203 in your system, then you must

make the settings here.