Specifications

189
Index
Numerics
12 Vdc connector (J1) 156
12 Vdc output connector (P5) 156
2-wire RCV impedance (JP8) 162
4-RCV (R107) 168
4-wire RCV impedance (JP10) 163
5 minute failsafe timeout 73
A
accessing serial setting of Station Transponder
Units
60
active polarity 72
address 90
alert off reset, relays 70
Alert parameters menu
hold time
69
ramp time 69
relays 69
sense input 69
test alert 69
tone 68
Alerts menu 67
Allow Handset use when PA on 74
always sound unit alerts 64
audio & PTT connections from console to servers
98
audio connections (P4) 159
audio connections to Station Transponder Unit
112
audio idle timeout period 86
audio support with optional VoIP Intercom 98
AUX RX (R137) 169
auxiliary audio RX impedance (JP15) 164
B
batch request hold timeout period 86
buttons, station transponder units 21
buttons, testing 114
C
CAD 12
CAD input selection
type
54
CAD serial communications
baud rate
54
port 54
CAD systems, what about 19
CAD Translator
configuring the translator and the viewer
53
installing 52
using the communications viewer 55
using the viewer 53
CAD viewer config
host
55
port 55
channel grant 22
channel request 22
collecting and assigning IP information 31
communication interface, station transponder
units
22
communications mode 64
Communications Mode menu
COR Communications mode
67
trunking modes 67
VOX 67
wireline 67
configuring Station Transponder Units
serial port programming
60