Specifications

Related Documentation

Overall System Operation

The IP FSA system uses a client-server architecture to receive commands and then direct

them to the appropriate fire stations. Figure 1 provides an example of the basic system.

The core of the system is made up of the following:

•FSA Server

• FSA Console client application running on the dispatch position computer

• One Model 6203 Station Transponder Unit installed at each fire station in the

system (optionally, one Model 6204 unit d also be installed at each fire station to

support additional units)

Title P/N Description

Fire Station Alerting

Installation and Maintenance

025-9581 Describes how to install and maintain the IP FSA

System.

Fire Station Alerting Operation 025-9582 Describes how to operate the IP FSA System.

Fire Station Alerting

XML CAD Protocol

025-9583 Defines the functional and protocol messages used

for communications between a third-party CAD

application and the Zetron FSA Server service.

Installing the VoIP Intercom Option 011-0741 Describes how to add a VoIP Intercom board to a

Model 6, Model 6203, or Model 6204.

Model 6 Upgrade for FSA Compatibility 011-0742 This application note covers installing the

components of the upgrade package 950-0839 on an

existing Model 6 Station Transponder.

Note FSA Server should be running on a computer dedicated to FSA-

related software. This computer should not be running any third-

party software or other Zetron software that is not related to FSA.