Product manual

Adjustments

radio and should be adjusted so background noise is not detected (COR/VOX LED off).

The COR/VOX LED should be off when the channel is idle, but should be on when the

channel is busy (voice traffic or tones).

MIC XMIT

This pot adjusts the HANDSET mic level. This level affects both the audio level

transmitted to the Model 6s and the feedback level heard in the Model 26’s HANDSET

ear. If this pot is adjusted completely counterclockwise HANDSET mic audio will be

muted. Adjust this pot as required.

TONE XMIT

This pot adjusts the tone level heard in the HANDSET earpiece of the Model 26. If this

pot is adjusted completely counterclockwise tones to the HANDSET ear will be muted.

Note that there are two tone sources. This pot only adjusts tones heard on the HANDSET

earpiece, not tones heard external to the HANDSET port. Adjust this pot as required.

EAR POST-RCV

This pot adjusts the received audio levels on the HANDSET ear while in Talk-Back

mode with a Model 6. If this pot is adjusted completely counterclockwise, all received

audio levels will be muted. Adjust this pot as required.

EAR RCV & SIDETONE

This pot is the final adjustment into the HANDSET ear. Adjusting this pot will increase

or decrease equally mic tone and received audio routed to the HANDSET earphone. If

this pot is adjusted completely clockwise, all audio will be muted to the HANDSET ear.

Adjust this pot as required.