Product manual

Software Configuration Program
53
Beep Off Time
This parameter holds the number of 50 millisecond time intervals used to set the interval
between beeps in the selected beep prompt. It accepts a value between 1 and 15.
Test Beep
Selecting this item from the Beep Parameters Menu plays the selected beep based on its
current parameters.
Clock Setting Menu
This menu is selected from the Main menu by pressing the “5” key and displays the menu
for setting the date and time. The date and time is only used for time stamping Data
Logging entries. When this menu item is selected the menu in
Figure 22 is displayed.
Figure 22: Clock Setting Menu
Factory Defaults
This menu item is found on the Main menu. Selecting this menu item causes the prompt
in
Figure 23 to be displayed.