Product manual

Installation
50 025-9158L
Figure 19: CAD/PRINTER Baud Rate Select Menu
CAD Retry Timeout
This parameter is found in the Serial Port Configuration Menu when CAD is the selected
mode of operation for the CAD/PRINTER port (see
Figure 18). It holds the CAD
interface transmit retry timeout value. This is the time interval that the Model 26 waits for
a response, on the CAD interface, after sending a CAD data packet. If no response is
received during this time interval, the Model 26 resends the data packet. This parameter
accepts a value between 0 and 59.99 seconds. A typical value for this parameter is 2.00
seconds.
Beeper Configuration Menu
This menu selection is found in the Main Menu. When this menu is selected, the menu in
Figure 20 is displayed showing all the configurable beep prompts and their current
parameter values.