Product manual

Software Configuration Program
47
There are two different Port Configuration menus, one for CAD and the other for Data
Logging. The menu that is displayed depends on which port function is currently
selected. The current setting is displayed next to option {1}. The setting can be changed
by selecting menu option {1}, which toggles between these two menus. The Data
Logging Menu appears in
Figure 17, and the CAD Menu appears in Figure 18.
Change to Data Logger Mode
This parameter is found in the Port Configuration Menu and selects the operating mode
of the CAD/PRINTER port. Selecting this parameter toggles the port’s operating mode
back and forth (Switch 7 must be ON in order to do this programming). The port assumes
the selected mode whenever OPTION SWITCH-7 is in the “OFF” position. The menu
displays the options available depending upon the current mode of the port, as shown in
Figure 17 and Figure 18.
Figure 17: Data Logging Menu
Change to Cad Mode
This parameter is found in the Port Configuration Menu when Data Logger Mode is the
current mode of operation for the CAD/Printer port (see
Figure 17). Selecting this
parameter places the Model 26 in CAD mode (as soon as OPTION SWITCH-7 is placed
back into the “OFF” position) and displays the menu parameters associated with CAD.