Product manual

4 025-9158L
• Be aware of and avoid contact with areas subject to high voltage or amperage. Because some components can
store dangerous charges even after power is disconnected, always discharge components before touching.
• Never insert objects of any kind through openings in the equipment. Conductive foreign objects could produce a
short circuit that could cause fire, electrical shock, or equipment damage.
• Remove rings, watches, and other metallic objects from your body before opening equipment. These could be
electrical shock or burn hazards.
• Ensure that a proper electrostatic discharge device is used, to prevent damage to electronic components.
• Do not attempt internal service of equipment unless another person, capable of rendering aid and resuscitation, is
present.
• Do not work near rotating fans unless absolutely necessary. Exercise caution to prevent fans from taking in
foreign objects, including hair, clothing, and loose objects.
• Use care when moving equipment, especially rack-mounted modules, which could become unstable. Certain
items may be heavy. Use proper care when lifting.
Change List for Rev L, 07 Jan 2011
• Revised manual to current template and document standards
• Corrected references to the configuration jumper for the serial port pinout (JP12) found on
pages
17 and 109.
• Corrected the description for JP8 found on page
21.
• Corrected the DIP switch positions for setting addresses listed in
Table 1 on page 25
• Edited the note about Keyboard Expansion cables to include part numbers, see page
25
• Added a note on interpreting the meaning of the COR/VOX LED after
Figure 11 on page 34
• Edited the Poll Time explanation to better explain its function and relation to other
parameters, see
Poll Time page 39
• Re-wrote
Appendix D: Setting Model 6 and Model 26 Audio Levels, starting on page 109, to
improve the clarity of the level setting instructions