Product manual

Hardware Jumper Settings

Installation

This section contains installation and service information. Each jumper, potentiometer,

connector, and software configurable parameter of the Model 26 is discussed in this

section. By starting at the beginning of this section and moving through it sequentially,

the Model 26 should be completely installed and configured at the conclusion of the

section. This section is also intended as a reference for many settings and adjustments of

the Model 26.

Hardware Jumper Settings

There are nine selectable jumpers on the Model 26 transceiver circuit board. Each jumper

setting is described in this section. See

Figure 5 for jumper locations on the main PCB.

Figure 5: Model 26 Jumper Locations

JP11

JP12

JP6

JP1

JP7

JP2

JP8

JP9

JP3

JP10

JP4 JP5