Instruction manual

Operation
025-9209 17
DIGITAL OUTPUT DEFINITION
Table 8. RTU Digital Output Definition Menu
Menu Selections Range Factory Settings
{L}atched mode Latched
{M}omentary mode 0-255 seconds 0 seconds
{O}utput ON
{F}orce output OFF
{N}ext output
E{x}it
Latched Mode
When latched mode is selected, if the output is commanded on, it will remain in that position
until it is commanded off (or power is removed).
Momentary Mode
When momentary mode is selected, the user will be prompted for a time in seconds that the
output is to remain in the on position after the output is commanded on. This value, 0-255,
will cause the output to automatically return to the off position after the time has expired.
Output On
This menu selection allows the user to locally control the outputs. This is used to check
operation and setting of the momentary time.
Force Output Off
This menu selection allows the user to locally control the outputs. This is used to check
operation and setting of the momentary time.
Next Output
This menu selection allows the user to increment the current output number. Once
incremented, the parameters for the new current output will be displayed along with the
menu. Once the user reaches the last output for the RTU, this item will change the current
output back to output number 1.
Exit
This selection takes the user back to the main menu.