Product manual

Introduction
10 025-9346G
convenience, a battery-backed clock is included on the display which can be programmed
for either the 12- or 24-hour format. This clock can also be disabled during setup for
dispatch centers that require the use of a central, master clock.
Programmable Key Functions
The Zetron Digital Tone Remotes have been specifically designed to support being
customized to fit the exact needs of the end user. The installer simply plugs in a PC and
selects which functions are to be assigned to the programmable keys on the remote. Once
the installer has programmed a single remote, the configuration can be saved and then
quickly uploaded into other units, allowing the installer to quickly clone as many parallel
remotes as the system requires.
The assignable functions include the following:
Since the programming is done in software, there is no need to spend time moving
jumpers or making other tedious adjustments. Adding capability to existing units is a snap
since a unit does not have to be opened to make operational changes. Adding frequencies
or pagers is as simple as editing the system programming file on a PC, so no messy, time
consuming hardware changes are required.
An additional advantage of the Digital Tone Remotes being programmed from a PC is that
the programming software can print out complete hard copy of how a remote is
programmed. This makes it easy to do the right thing and document the system setup for
future reference.
Privacy Mode and Supervisory Control
A privacy feature may be implemented during multi-remote applications. This allows an
operator to silence and lock out other, parallel Model 280s or 284s in the system. The
other operators will not be able to initiate any functions until the privacy mode is released,
however, their displays will still indicate the true status of the radio station.
• Single frequency selection
assigned to each key (F1 - F8)
• Coded/Clear
• Double frequency selection
assigned to the top row of keys
(F1/F2, etc.)
• Privacy • Intercom
• Second receiver mute On/Off • Repeat On/Off
• Mute • PL1, PL2, PL3, PL4
• Wild I, Wild II • Monitor
• 1 kHz Alert • Supervisor takeover
• Siren Alert • 5-beep Alert
• High/Low Alert • Fast Siren Alert
• Off-hook Speaker Mute • Instant Call
• Unselect Mute • Hook Disable
• Call Decoder Mute