Instruction manual
Optional Equipment Installation
025-9416 101
Table 1:
Internal dest
number
(fixed internally)
8-character
Name
(aribitrary)
Modem Ph#
to provider
Baud
Rate(300,1200,
2400,4800,9600)
Data Bits,
Parity, Stop
Bits
(usually e,7,1)
Req’s
10 digit
ID’s
(Y/N)
Area Code
if requires
10 digit
ID’s
TAP00
TAP01
TAP02
TAP03
TAP04
TAP05
TAP06
TAP07
TAP08
TAP09
2. Back up all M640 database.
3. From the main menu in MCU, select COMM then ZLINK. This should connect with the
M640 and display a + prompt.
4. Access the RAW oparam programming menu.
a. At the + prompt press Enter. The Model 640 Databases menu should display, and you
should have a flashing cursor at the Entry prompt.
b. At the Entry prompt type the word RAW and press Enter. The following prompt appears.
(N, ?, .) Entry:
5. Create RAW oparams.
a. At the Entry prompt enter the letter N (for New Entry). The following prompt appears.
RawName: (8 chars) ?
b. At the RawName prompt enter 00baud. The following prompt appears.
OparamData: (70 chars) ?
c. At the OparamData prompt enter the following line of code and, using the information
from table 1, substitute the variables 0x and 0y as necessary per Tables 2 and 3.
10 00 05 02 00 0x 0y 20
Table 2:
0x Sets baud rate to
00
300 baud
01
1200 baud
05
2400 baud
06
4800 baud
02
9600 baud