Instruction manual

Adjustment Procedures
92 025-9416
D i s p l a y R e c o r d
PhoneNumber: 9991
SubscriberName: 2tone+voice test1
ServiceName: 2ttest
Capcode: 05000.0 10000.0
SecurityCode :
Status: V
CallCount: 0
(<cr>, P, D, M, N, L, F, Z, S, T, B, ?, .)
Entry:
Choose any logical
name that describes
the subscriber.
Corresponds to
class of service
created in step #3
This tells the M640 that the pager is 2-
tone and its frequencies are 500 and
1000 Hz. Note that the tones need to be
entered in tenths of a Hz.
(Ex: 5000 = 500 Hz, 10000 = 1000 Hz)
Figure 54. Model 640 Database 2-Tone Subscriber Record
q
6. Save the record by entering S.
q
7. Enter N to create another Subscriber record.
q
8. Fill in the record identical to Figure 54, modifying the fields as follows:
enter 9992 for the PhoneNumber (or an appropriate #)
enter 2tone+voice test2 for the SubscriberName (or suitable alternative)
enter 10000 and 20000 for the Capcode (1000 Hz and 2000 Hz)
q
9. Save the record by entering S.
q
10. If the application requires digital paging, create a new Subscriber in the Model 640
database as follows:
Enter a period (.) to back out to the Subscriber Phone Numbers menu.
Select 1 - Subscribers.
Enter N to create a New record.
Fill in the record similarly to the subscriber shown in Figure 55.