User Manual

ZEROTECH (Beijing) Intelligence Technology Co., Ltd. 19
When you are not taking selfies, we suggest you set it to “Find a View” to switch back to the Camera’s
perspective for easier operation.
This option only works with the motion sensing method and the two sticks methods, not with the swipe
screen method. The swipe screen method always follows the camera’s perspective.
Control Method
It’s set to “Motion Sensing” by default.
Do.Fun comes with 4 control methods that users can choose between: “Motion Sensing”, “Swipe Screen”,
“Free Sticks” and “Safe Sticks”.
The motion sensing method uses your mobile device’s gravity sensor. It allows you to control DOBBY’s
flight by tilting your mobile device. For specifics on operation, please refer to “Motion Sensing Method” on
page 27.
Looking through the camera’s perspective, the swipe screen method allows you to control DOBBY’s flight
by swiping the screen in the viewfinder frame. For specifics on operation, please refer to “Swipe Screen
Method” on page 29.
Just like the remote controller, the free sticks method allows you to control DOBBY’s flight by holding the
virtual sticks and toggling up/down/left/right. For specifics on operation, please refer to “Free Sticks
Method” on page 30. You can choose between “American Operator” (left-hand throttle) and “Japanese
Operator” (right-hand throttle).
Just like the remote controller too, the safe sticks method allows you to control DOBBY’s flight by tapping
on the arrows on the four directions in the virtual sticks. For specifics on operation, please refer to “Safe
Sticks Method” on page 32. Also, you can choose between “American Operator” (left-hand throttle) and
“Japanese Operator” (right-hand throttle).
Change Wi-Fi Information
You can change the Wi-Fi’s SSID and password. The SSID can be up to 16 characters long. It can be
made up of Chinese, English, numbers and/or special characters. The password has to be between 8-20
characters long and can be made up of numbers, letters and/or special characters.
Frequency Switch
The default frequency is set to 2.4GHz.
DOBBY supports both a 2.4GHz and 5GHz frequency. You can switch between them on this page.
Check the legalities of both frequencies in you country before changing.