User's Manual

▋Before You Begin
Charge the Smart Microcurrent Stimulator first with its bundled magnetic charging cable.
Connect the cable to a charger or a PC and Smart Microcurrent Stimulator to start
charging.
(Red light: charging in progress. Blue light: charging completed.)
▋Smart Microcurrent Stimulator -
Introduction:
❶. Smart Microcurrent Stimulator charging port: A magnetic
charging cable is included. Connect it to a charger or a PC to start charging.
❷. Power button:
Turn on: press and hold for 3 seconds, the light starts blinking.
Turn off: press and hold for 3 seconds, the light stops blinking.
❸. Microcurrent connector: this transmits microcurrent to the accessories.
▋Smart Microcurrent Stimulator – Specification:
Model
WIS- SM - 003、 WI S -S M- 004
Specification
Dimensions: 51.6 x 38 x 15.6 mm
Weight: 17.2g
Rated voltage: 4.2V / 0.2A
Power supply for the charging: USB 5V
Material: ABS
Bluetooth version: Bluetooth 4.0
Current output: 16uA~100uA
Operating mode: 4 modes , 16 adjustable levels of current intensity
Battery capacity: 75mAH
Duration: 12 minutes/time. Can be used 5 -8 times after being fully
charged.
Charging method: Charging with USB.