Instruction manual

Setup
Page 44 Solution & Solution XL Operating Manual – Issue 1.0
Figure 29 - Change Type
Under the Type column, select the [Change] button for the required fixture or
the [Change] button in the ALL row to change all of the selected fixtures.
Select the Manufacturer, Fixture Type and Mode (if applicable) using the
MFKs or via the popup window on the monitor and confirm the change type
operation.
Deleting Fixtures
Press the [Delete] button on the monitor. A confirmation window is displayed.
Click on the [OK] button to delete the selected fixture(s).
Auto Menus
This Setup option generates automatic palettes, groups and macros based on
the fixtures assigned. The exact contents of these depends on the
capabilities of the fixtures you assign.
Auto Groups
Press the [Auto Menus] MFK or select the [Auto Menus] button on the Setup
Window
Press the [Create Auto Groups] MFK or select the [Create Auto Groups]
option from the drop down menu on the monitor.
The desk then generates an All Fixtures group, a group for each fixture type
on the desk, including dimmers, plus an „odd‟ and „even‟ group for each
different fixture type in the schedule. These groups can be used for selecting
the fixtures quickly, using the MFKs or monitor.
Auto Palettes
Press the [Auto Menus] MFK or select the [Auto Menus] button on the Setup
Window
Press the [Create Auto Palettes] MFK or select the [Create Auto Palettes]
option from the drop down menu on the monitor.
The desk then generates a number of colour, beamshape and position
palettes for each moving fixture type in the fixture schedule and a number of
standard effects palettes, as described below:
Colour Palettes
The desk provides a set of standard colour palettes.
The desk generates an auto palette for each colour available on every fixed
colour wheel in the fixture. These palettes are labelled with the stock colour
names as supplied by the manufacturer.
Beamshape Palettes
The beamshape palettes generated by the desk are based on the gobo wheel
and shutter parameters of the fixtures as follows:
 Gobo Wheel(s) – An auto palette for each Gobo present on each gobo
wheel in the fixture.
 No Gobo – This auto palette sends all the „Gobo‟ parameters to their
default values.
 Shutter - Two auto palettes (Shutter Open and Shutter Closed).