Instruction manual

Quick Start Guide
Page 28 Solution & Solution XL Operating Manual – Issue 1.0
Desk Setup
Figure 9 - Desk Setup
The Desk Setup function allows you to configure or customise the settings on
the desk to your own requirements.
Desk Setup is divided into a number of different sections which are accessed
by pressing the corresponding MFK or soft button on the monitor.
A summary of the Desk Setup options are provided below. For full details of
the various options refer to the Setup chapter in the User Manual.
 Displays – Adjust the brightness and contrast of the Main LCD and other
LCDs on the front panel; calibration of external touch screen monitor;
screen timeout.
 Peripheral - Allow mouse or trackball to control pan and tilt parameters;
adjust control wheel sensitivity.
 Inputs – Set up SMPTE and MIDI Timecode; Set CAN mode; MIDI
Notes; Configure Remote Switches.
 Outputs – Map DMX universe to the physical DMX outputs on the desk.
 Behaviour – Confirm Overwrites; Recovery Mode; Preset Mixing; Keep
Parameters Separate options.
 Memory Defaults – Set up the default delay and fade times for each
attribute (Intensity, Colour, Beamshape, Position); Move on Dark
parameters.
 Submaster Defaults – Set up default options for flash button action,
trigger level and attribute fade times.
 Set Date – Set the date on the desk.
 Set Time – Set the time on the desk.