Instruction manual

Quick Start Guide
Page 24 Solution & Solution XL Operating Manual – Issue 1.0
Playing Back Submasters
Before playing back submasters, it is important to clear the Program Window
by pressing the CLEAR button. This prevents any unprogrammed data from
affecting the outuput of the submasters.
Raising a submaster fader will bring the data programmed on the submaster
to the outputs. For attributes, the submaster will trigger at 5% a crossfade to
the new values. For dimmers, the submaster fader provides intensity control.
Page Overlay on Submasters
It is possible to output scene or chase data from several submasters on
different pages at the same time provided that they are not controlled by the
same physical fader.
If the submaster page is changed while any of the submaster faders are up, or
any of the SUBMASTER FLASH buttons are being held down, the fader and
button remains in control of the original data and the outputs for the original
submaster are held.
The new scene, chase or transferred memory associated with the fader or
button is not made available until the fader is brought back down to zero or
the flash button is released.