Instruction manual

FROG Function Screen
This screen is displayed on the monitor
when the FROG Function screen is
displayed on the Main LCD.
This screen is not lockable.
This screen shows the current FROG
Function parameters (Mode, Speed,
Colour Action, Colour Minimum etc.).
Palette Screens
There is a separate monitor palette
screen for each of the LTP attributes
(Colour, Beamshape and Position).
To display and lock a palette screen on
the monitor - hold down the F1 button
and then press the COLOUR,
BEAMSHAPE or POSITION button.
This action also locks the CHANNEL
FLASH buttons on the front panel to
operate as the corresponding palette
selection buttons.
To display a palette screen temporarily
on the monitor, hold down the
COLOUR, BEAMSHAPE or POSITION
button, as required. The palette screen
will disappear from the monitor on
release of the attribute button.
The palette screen shows the number
and name of the palettes for the
selected attribute.
Unprogrammed palettes have an
asterisk (*) displayed next to their
palette number.
Fixture Groups Screen
There is no equivalent Fixture Groups
screen on the Main LCD.
To display and lock the Fixture Groups
screen on the monitor, hold the F1
button down and then press the
GROUP button (F4 on Fat Frog).
To display the Fixture Groups screen
temporarily on the monitor, hold down
the GROUP button (F4 on Fat Frog).
The Fixture Groups screen disappears
on release of the GROUP button.
The Fixture Groups screen shows the
number and name of the groups
together with which fixtures are
selected in each group.
The “Primary” fixture in the group is
indicated by a ‘P’, the other fixtures in
the group are indicated by an ‘X’.
Unprogrammed fixture groups have an
asterisk (*) displayed next to their
group number.
Note
Fixture Groups Screen (Bull Frog)
Hold F1 and press the up or down arrow key
to switch between groups 1-24 and 25-48.
Frog Series 73-750-00 Issue 6 7 - 13
Other Features
Figure 7 - 8: Colour Palettes Screen (Monitor)