Instruction manual

Lock Function
When the desk is locked (indicated by
the red light in the LOCK button), all of
the editing facilities are disabled and
none of the desk setup, memory or
submaster data can be modified.
Programmed memories can still be run
as normal from the memory stack
(using the Playback X controls).
Programmed submasters still output
their data as normal.
Programmed palettes can still be
output when the desk is locked.
The editing facilities can only be
enabled by unlocking the desk.
The SUBMASTER FLASH buttons are
used to enter the 4 digit code required
when locking or unlocking the desk.
During these operations, the normal
flash functions are disabled.
The default lock code for the desk is
0000. The lock code for the desk can
be changed in Super User.
Each individual desk also has its own
unique code which will unlock the
desk. Contact your dealer or Zero 88
for further information.
Locking the Desk
1. To lock the desk, press the LOCK
button on the front panel. The
LCD shows the following:
**** LOCK DESK *****
Enter code using s/m
flash buttons:
[OK] {Cancel}
2. Enter the current lock code using
the SUBMASTER FLASH buttons
(submaster 10 represents 0).
As each digit is entered, a ‘*’ is
displayed on the LCD:
**** LOCK DESK *****
Enter code using s/m
flash buttons: ****
[OK] {Cancel}
3. Press the ENTER key to complete
the operation.
If the correct code is entered, the
desk is locked and the light in the
LOCK button is illuminated.
If the wrong lock code is entered,
an error message is displayed on
the LCD.
Unlocking the Desk
1. To unlock the desk, press the
LOCK button on the front panel.
The LCD shows the following:
*** UNLOCK DESK ****
Enter code using s/m
flash buttons:
[OK] {Cancel}
2. Enter the current lock code using
the SUBMASTER FLASH buttons
(submaster 10 represents 0).
As each digit is entered, a ‘*’ is
displayed on the LCD:
*** UNLOCK DESK ****
Enter code using s/m
flash buttons: ****
[OK] {Cancel}
3. Press the ENTER key to complete
the operation.
If the correct code is entered, the
desk is unlocked and the light in
the LOCK button is turned off.
If the wrong code is entered, an
error message is displayed on the
LCD.
Frog Series 73-750-00 Issue 6 7 - 3
Other Features
Figure 7 - 3: Other Controls including Lock Button