Instruction manual

Viewing Outputs
The OUTPUTS button allows the user
to view the current desk channel
outputs (generic and fixture channels),
or the DMX channel outputs on the
main LCD display.
Bull Frog - The DMX outputs for
universe A or universe B can be
displayed on the LCD.
Desk Channel Outputs
1. Press the OUTPUTS button on
the front panel. The LCD display
changes to the following:
View O/P <Desk Chan>
CHAN 1 100
CHAN 2 75
CHAN 3 50 v
2. Use the up and down arrow keys
to view the current outputs of the
generic channels (in %).
3. If fixtures have been assigned,
the current output values for the
fixture parameters are shown
after the list of generic channels.
They are displayed as fixture
number, parameter name and
DMX value. For example:
View O/P <Desk Chan>
Fix 1 Cyan 128 ^
Fix 1 Magenta 255
Fix 1 Yellow 0 v
4. Use the up and down arrow keys
to view the current outputs of the
fixture channels. The output levels
are shown as DMX (0-255).
DMX Outputs
1. Press the OUTPUTS button on
the front panel. The LCD display
changes to the following:
View O/P <Desk Chan>
CHAN 1 100
CHAN 2 75
CHAN 3 50 v
2. Use the + or - keys to change the
View O/P field on the LCD to
DMX (DMX A or DMX B on the
Bull Frog and Mambo Frog). The
LCD display changes to the
following:
View O/P < DMX >
1 255
2 128
3 200 v
3. Use the up and down arrow keys
to view the current outputs on the
DMX channels (1 - 512).
7 - 2 Frog Series 73-750-00 Issue 6
Other Features
Figure 7 - 2: Front Panel - Memory Control Section