Instruction manual

Illumination
This function allows the user to adjust
the brightness and contrast of the
LCD(s) on the desk.
The Illumination options are:
• Main LCD Brightness
•
Main LCD Contrast
•
Wheel LCD Brightness
•
Wheel LCD Contrast
•
Exit.
Setting the Illumination
1. Select the Illumination option from
the Super User screen and press
the ENTER key. The LCD screen
shows the following:
*** ILLUMINATION ***
Main LCD B: <100%>
Main LCD C: <100%>
Wheel LCD B:<100%> v
2. Use the up and down arrow keys
to select the required option.
3. Use the + and - keys to adjust the
level as required (0 – 100%).
4. To exit the Illumination screen,
press the ENTER key. The LCD
returns to the Super User screen.
Set Recovery Mode
This function allows the user to switch
Recovery mode on or off. For further
details on Recovery see chapter 7.
Setting the Recovery Mode
1. Select the Set Recovery Mode
option from the Super User
screen and press the ENTER key.
The LCD shows the following:
*** SET RECOVERY ***
Recovery: <On >
[Exit]
2. Use the + and - keys to set
recovery to On or Off.
3. Press the ENTER key to exit the
Set Recovery screen and return
to the Super User screen.
Set Date & Time
The Set Date and Time function allows
the user to set the date and time on the
desk.
Setting the Date and Time
1. Select the Set Date & Time option
from the Super User screen, then
press the ENTER key. The LCD
shows the following:
** SET DATE & TIME *
Date: <dd :mm:yyyy>
Time: <hh:mm:ss>
[SET] {CANCEL}
2. Use the up and down arrow keys
to select the field to adjust.
The Date consists of three fields
(day, month, year).
The Time consists of three fields
(hours, minutes, seconds).
3. Use the + and - keys to adjust the
selected field.
4. Press the ENTER key to set the
date and time to the values shown
on the LCD. The LCD returns to
the Super User screen.
6 - 14 Frog Series 73-750-00 Issue 6
Super User