Instruction manual

Clear/Reset Functions
Select the Clear/Reset option from the
Super User screen and press the
ENTER key. The LCD shows:
** CLEAR/RESET FNS *
{Clear Memories}
{Clear Submasters}
{Clear Palettes} v
The Clear/Reset options are:
•
Clear Memories
•
Clear Submasters
•
Clear Palettes
• Clear Groups
• Clear All
• Clear to Default
•
Exit
Some of the Clear/Reset options are
not applicable on the Frog desk.
Use the up and down arrow keys to
select the required option, then press
the ENTER key to activate that option.
Clear Memories
This function clears all the
programmed memories on the desk
and any submasters or SX buttons with
transferred memories.
1. Select the Clear Memories option
from the Clear/Reset screen, then
press the ENTER key. The LCD
shows the following:
CLEAR MEMORIES
Are you sure ?
[OK] {Cancel}
2. Press the ENTER key to confirm
the clear operation.
Clear Submasters
This function clears all submasters.
1. Select the Clear Submasters
option from the Clear/Reset
screen, then press the ENTER
key. The LCD shows:
CLEAR SUBMASTERS
Are you sure ?
[OK] {Cancel}
2. Press the ENTER key to confirm
the clear operation.
Clear Palettes
This function clears all the
programmed palettes on the desk.
1. Select the Clear Palettes option
from the Clear/Reset screen, then
press the ENTER key. The LCD
shows the following:
CLEAR PALETTES
Are you sure ?
[OK] {Cancel}
2. Press the ENTER key to confirm
the clear operation.
Clear Groups
This function clears all the fixture
groups on the desk.
1. Select the Clear Groups option
from the Clear/Reset screen, then
press the ENTER key. The LCD
shows the following:
CLEAR GROUPS
Are you sure ?
[OK] {Cancel}
2. Press the ENTER key to confirm
the clear operation.
Clear All
This function clears all the memories,
submasters, palettes and fixture
groups on the desk.
1. Select the Clear All option from
the Clear/Reset screen, then
press the ENTER key. The LCD
shows the following:
CLEAR ALL
Are you sure ?
[OK] {Cancel}
2. Press the ENTER key to confirm
the clear operation.
Clear to Default
This function performs the following
actions:
•
The Clear All function (see above).
•
Resets the Desk Setup parameters
to their default values.
•
Resets the current lock code to
0000.
•
Resets the Program Mode to Full.
• Loads the default setup onto the
desk.
1. Select the Clear to Default option
from the Clear/Reset screen, then
press the ENTER key. The LCD
shows the following:
CLEAR TO DEFAULT
Are you sure ?
[OK] {Cancel}
2. Press the ENTER key to confirm
the operation.
Exit Clear/Reset Functions
1. Select the Exit option from the
Clear/Reset screen, then press
the ENTER key. The LCD returns
to the Super User screen.
Frog Series 73-750-00 Issue 6 6 - 13
Super User