Instruction manual

Floppy Disk Functions
Select the Floppy Disk option from the
Super User screen and press the
ENTER key. The Floppy Disk screen is
shown on the LCD:
**** FLOPPY DISK ***
{Load Show}
{Save Show}
{Format Disk}v
The Floppy Disk options are:
•
Load Show
•
Save Show
•
Format Disk
• Load CFT
• Exit.
Use the up and down arrow keys to
select the required option, then press
the ENTER key to activate that option.
Load Show
This function allows the user to load a
previously saved show onto the desk
from a floppy disk.
1. Ensure that a disk containing
show files is inserted into the
floppy disk drive.
2. Select the Load Show option from
the Floppy Disk screen. The desk
reads the floppy disk and
searches for valid show files. The
LCD shows the following:
***** LOAD SHOW ****
< Show01.isf >
< 10KB 5/2/2001 >
[Load[ {Cancel}
If the disk contains several shows,
use the + and - keys to select the
required show.
3. Press the ENTER key to load the
show onto the desk. While the
show is loading, the LCD shows:
Loading Show01
Please Wait …
xx% Done.
[Cancel]
4. When the show is loaded
successfully, the LCD shows:
show01 Loaded
[OK]
5. Press the ENTER key to return to
the Floppy Disk screen.
Save Show
This function allows the user to save
the current show onto a floppy disk.
The shows are identified by number
only and are stored on the floppy disk
as “Show01”, “Show02” etc..
1. Ensure that a formatted disk is
inserted into the floppy disk drive.
2. Select the Save Show option from
the Floppy Disk screen. The LCD
shows the following:
***** SAVE SHOW ****
Show No: < 1*>
[SAVE] {Cancel}
An asterisk (*) is displayed next to
the show number if the file does
not exist on the floppy disk. The
Show No defaults to the first
available show on the disk.
3. Use the + and - keys to select the
required show number (01 - 99).
4. Press the ENTER key to save the
show to floppy disk.
5. If the show already exists on the
floppy disk, a warning is displayed
on the LCD:
Show already exists
Overwrite file ?
[OK] {Cancel}
6. Press the ENTER key to overwrite
the file.
7. While the desk is saving the show
to floppy disk the LCD shows:
Saving Show01
Please Wait …
xx% Done.
[Cancel]
8. When the show is loaded
successfully, the LCD shows:
Show01 Saved
[OK]
9. Press the ENTER key to return to
the Floppy Disk screen.
Frog Series 73-750-00 Issue 6 6 - 11
Super User