Instruction manual

Remote Switches
This option allows the user to globally
enable or disable the remote switches
and to configure each of the six remote
switches, as required.
The configuration options for each
remote switch are as follows:
• None = No Action
•
Go = GO button push
• Go Mem = Go to Memory
Enabling and Configuring the
Remote Switches
1. Select the Remote Switches
option from the Desk Setup
screen and press the ENTER key.
The Remote Switches screen is
displayed on the LCD:
* REMOTE SWITCHES *
Enabled: < Yes >
Switch No: < 2 >
Action: <Go Mem>v
2. Use the up and down arrow keys
to move the cursor through the
fields as required.
3. Use the + and - keys to adjust the
value in the selected field as
required.
4. Press the ENTER key to exit the
Remote Switches screen and
return to the Desk Setup screen.
Frog Screen
This option allows the user to
configure each of the 130 soft buttons
in the Play Memories section of the
Frog Screen as required.
The configuration options for each
Frog Screen Button are as follows:
• None = No Action
•
Go = GO button push
• Go Mem = Go to Memory
Configuring the Frog Screen
Buttons
1. Select the Frog Screen option
from the Desk Setup screen and
press the ENTER key. The Frog
Screen Buttons screen is
displayed on the LCD:
FROG SCREEN BUTTONS
Button No: < 1 >
Action: <Go Mem>
Memory: < 1s >v
2. Use the up and down arrow keys
to move the cursor through the
fields as required.
3. Use the + and - keys to adjust the
value in the selected field as
required.
4. Press the ENTER key to exit the
Frog Screen Buttons screen and
return to the Desk Setup screen.
Timecode Setup
This function allows the user to set up
the SMPTE or MIDI timecode source
and frame rate.
This is used when a show file created
on a Frog series desk is transferred
and then played back on a Frog Box,
using SMPTE or MIDI timecode signals
to trigger the memories.
1. Select the Timecode Setup option
from the Desk Setup screen and
press the ENTER key. The
Timecode Setup screen is
displayed on the LCD:
** TIMECODE SETUP **
Status: <Enabled>
Source: < SMPTE >
Frames/Sec:< 25 >
2. Use the up and down arrow keys
to move the cursor through the
editable fields.
3. Use the + and - keys to select the
required options in the Status,
Source and Frames/Sec fields.
4. Press the ENTER key to exit the
Timecode Setup screen and
return to the Desk Setup screen.
Exit Desk Setup
1. Select the Exit Desk Setup option
from the Desk Setup screen.
2. If any changes have been made
to the Desk Setup, a warning
message is displayed on the LCD:
***** WARNING ******
Desk Setup Modified
Save Changes ?
[OK] {Cancel}
3. Press the ENTER key to save the
changes, or select the Cancel
button and press ENTER to lose
the changes. The LCD returns to
the Super User screen.
If no changes have been made to
the Desk Setup, no warning is
displayed and the LCD returns to
the Super User screen.
6 - 10 Frog Series 73-750-00 Issue 6
Super User