Instruction manual

Pan/Tilt Options
Select the Pan/Tilt Options option from
the Desk Setup screen and press the
ENTER key. The Pan/Tilt Options
screen is displayed on the LCD:
Fixture No: < 1>
Pan Reverse: < No>
Tilt Reverse: < No>
Pan/Tilt Swap:< No>v
The Pan Reverse, Tilt Reverse and
Pan/Tilt Swap can be set for each
assigned fixture, as required.
Use the + and - keys or the fixture
selection buttons on the front panel to
select a fixture number.
Use the up and down arrow keys to
select the field required.
Use the + and - keys to select Yes or
No as required.
If an assigned fixture does not have
pan/tilt parameters (eg colour scroller),
the Pan/Tilt Options screen shows the
following:
Fixture No: < 11>
Pan/Tilt Options
Not Applicable
[Exit]
If a fixture is not assigned, the Pan/Tilt
Options screen shows the following:
Fixture No: < 12>
Fixture Not
Assigned
[Exit]
Press the ENTER key to return to the
Desk Setup screen.
Patch Functions
Select the Patch Functions option from
the Desk Setup screen and press the
ENTER key. The Patch Functions
screen is displayed on the LCD:
** PATCH FUNCTIONS *
{Manual Patch}
{Auto Patch}
{Set Default Patch}v
The options available on the Patch
Functions screen are:
•
Manual Patch
•
Auto Patch
•
Set Default Patch
•
Clear DMX Patch
•
Exit.
Use the up and down arrow keys to
select the required option, then press
the ENTER key to activate that option.
Manual Patch Screen
The Manual Patch screen on the LCD
serves several purposes:
• To allow the user to manually patch,
modify or unpatch individual generic
channels.
•
To allow the user to add and patch
duplicates to generic channels.
• To allow the user to manually patch,
modify or unpatch individual fixtures
• To display the current DMX patch
(ie. show what each generic channel
and fixture is currently patched to).
Manual Patch - Generics
To manually patch the generic
channels on the desk to the DMX:
1. Select the Manual Patch option
from the Patch Functions screen.
The LCD shows the following:
*** MANUAL PATCH ***
Channel 1: < >
Channel 2: < >
Channel 3: < > v
2. Use the up and down arrow keys
or the SHIFT button and the
CHANNEL FLASH buttons to
select a generic channel.
The red light in the CHANNEL
FLASH button and the LCD
cursor indicate the selected
channel.
3. Use the + and - keys to set the
DMX address.
When selecting a DMX address,
any DMX channels which are
already patched will be skipped
over automatically.
The LCD shows the DMX address
patched to each channel, for
example:
*** MANUAL PATCH ***
Channel 1: <101>
Channel 2: <102>
Channel 3: <103> v
4. To unpatch a generic channel,
select the channel to be
unpatched, then press the CLEAR
button on the front panel.
5. When all the required channels
have been patched, press the
ENTER key to exit the Manual
Patch window.
Notes - Patching Generics (Bull Frog)
The generic channels may be patched to
either DMX universe (A or B).
The universe identifier (A or B) is displayed
on the Manual Patch screen (eg A123
represents universe A, DMX channel 123).
When in the Manual Patch screen, the EDIT
button can be used to toggle between the
two universes.
Frog Series 73-750-00 Issue 6 6 - 7
Super User