Instruction manual

Assigning Common Fixtures
This section describes how to assign a
fixture to one of the 20 common fixture
types permanently stored on the desk.
1. Select the Assign Fixtures option
from the Desk Setup screen and
press the ENTER key.
The Assign Fixture screen is
displayed on the LCD:
ASSIGN FIX:< 1*>
< >
< >
[ASSIGN] {EXIT}
2. Use the + and - keys or the
FIXTURE SELECTION buttons on
the front panel to select an
unassigned fixture.
3. Press the down arrow key once to
move the cursor to the fixture list
field (lines 2 and 3 on the LCD).
4. Use the + and - keys to move
through the list of 20 common
fixture types to select a fixture
type. For example:
ASSIGN FIX:< 1*>
<Martin >
<MAC 500 (Mode 2) >
[ASSIGN] {EXIT}
5. Press the down arrow key to
select the Assign button, then
press the ENTER key.
The fixture type is assigned to the
fixture, the * is removed from the
fixture number, and the flashing
cursor returns to the fixture
number field as shown below:
ASSIGN FIX:< 1 >
<Martin >
<MAC 500 (Mode 2) >
[ASSIGN] {EXIT}
6. To assign fixture 2: Press the +
key or FIXTURE SELECTION
button 2 on the front panel. The
LCD shows:
ASSIGN FIX:< 2*>
< >
< >
[ASSIGN] {EXIT}
7. To assign the same fixture type,
ie. Martin MAC 500 (Mode 2),
press the down arrow key twice to
select the Assign button, then
press the ENTER button.
8. To assign a different fixture type,
move the cursor onto the fixture
list field. Use the + and - keys to
select the required fixture type,
move the cursor onto the Assign
button, then press the ENTER
button.
NOTE
Common Fixtures
The default set of 20 common fixture types
on the Frog series desks are as follows:
Lamp and Scroller
Martin MAC 250 (M4)
Martin MAC 300 (M4)
Martin MAC 500 (M4)
Martin MAC 600 (M4)
Martin Roboscan Pro 518 (M2)
Martin Roboscan 812 (Extended)
High End Studio Color
High End Studio Color 250
High End Studio Spot
High End Studio Spot 250
High End Cyberlight (M2)
High End Technobeam (Full)
High End Trackspot
Clay Paky Goldenscan HPE
Clay Paky Stage Scan
Clay Paky Stage Color 300 (16 bit)
Clay Paky Stage Color 1200 (16 bit)
Clay Paky Stage Light 300 (16 bit)
Clay Paky Stage Zoom 1200 (16 bit)
To change the common fixture types stored
on the desk, see the Load CFT function later
in this chapter.
6 - 4 Frog Series 73-750-00 Issue 6
Super User
Figure 6 - 3: Fixture Controls (Fat Frog)