Instruction manual

Assign Fixtures
This function allows each of the
fixtures to be assigned to a particular
fixture type (eg. Martin MAC 250,
High End Cyberlight ).
It also provides methods for viewing
the current fixture assignments, and
unassigning fixtures.
The desks store 20 popular fixture
personalities internally (see later this
section for details).
Other fixture types are available for
assignment from the fixture library file
on floppy disk.
The latest Zero 88 fixture library for the
Frog Series of desks can be
downloaded from the Zero 88 or Frog
Support Forum websites.
The Assign Fixture Screen
Select the Assign Fixtures option from
the Desk Setup screen and press the
ENTER key. The Assign Fixture screen
is displayed on the LCD:
ASSIGN FIX:< 1*>
< >
< >
[ASSIGN] {EXIT}
The flashing cursor is displayed on the
Fixture number field (as shown above).
Use the + and - keys or the FIXTURE
SELECTION buttons to select the
required fixture.
If the selected fixture is not assigned,
an asterisk (*) is displayed next to the
fixture number, and no data is
displayed in the second and third rows
of the LCD, as in the example above.
If the down arrow key is pressed once,
the second and third rows of the LCD
show the manufacturer and fixture type
which was last assigned (if any).
For example, if fixture 1 had been
assigned to High End Systems
Cyberlight (M1), then fixture 2 is
selected, and the down arrow key is
pressed, the LCD would show:
ASSIGN FIX:< 2*>
<High End Systems >
<Cyberlight (M1) >
[ASSIGN] {EXIT}
If the selected fixture is assigned, the
LCD shows the manufacturer and
fixture name in rows three and four of
the LCD. See example below:
ASSIGN FIX:< 3 >
<Martin >
<MAC 500 (Mode 2) >
[ASSIGN] {EXIT}
Pressing the down arrow key once
moves the flashing cursor to the fixture
list field (lines 2 and 3 of the LCD):
ASSIGN FIX:< 3 >
<Martin >
<MAC 500 (Mode 2) >
[ASSIGN] {EXIT}
The fixture list field contains a “blank”,
the 20 common fixture types, any
fixture types loaded from disk, and a
Select Fixture from Floppy option.
The + and - keys are used to scroll
through the fixture list.
To exit the Assign Fixture screen,
select the EXIT button as shown
below, then press the ENTER key on
the front panel.
ASSIGN FIX:< 3 >
<Martin >
<MAC 500 (Mode1) >
[ASSIGN] {EXIT}
Frog Series 73-750-00 Issue 6 6 - 3
Super User
Figure 6 - 2: Fixture Controls (Fat Frog)