Instruction manual

Desk Setup
Select the Desk Setup option from the
Super User screen and press the
ENTER key. The Desk Setup screen is
shown on the main LCD:
**** DESK SETUP ****
{Desk Defaults}
{Assign Fixtures}
{Pan/Tilt Options} v
The following Desk Setup options are
available:
•
Desk Defaults
•
Assign Fixtures *
• Pan/Tilt Options *
• Patch Functions
• Program Mode *
•
Remote Switches
• Frog Screen
• Timecode Setup
• Exit Desk Setup.
Use the up and down arrow keys to
select the required option, then press
the ENTER key to activate that option.
The options marked with a * are not
applicable on the Frog desk.
Desk Defaults
Select the Desk Defaults option from
the Desk Setup screen and press the
ENTER key. The Desk Defaults screen
is displayed on the main LCD:
** DESK DEFAULTS ***
{Memory}
{Submaster}
[Exit]
Use the up and down arrow keys to
move the cursor through the fields.
Select the required option and press
the ENTER key.
Memory Defaults
Select the Memory option from the
Desk Defaults screen and press the
ENTER key. The Memory Defaults
screen is displayed on the main LCD:
* MEMORY DEFAULTS *
Fade Up: <00:03.0>
Fade Down:<00:03.0>
LTP Fade: <00:03.0>v
Use the up and down arrow keys to
move the cursor through the fields.
Use the + and - keys to adjust the
value in the selected field.
Fade Up - The default HTP fade up
time. Range 00:00.0 to 99:59.9;
Default = 00:03.0.
Fade Down - The default HTP fade
down time. Range 00:00.0 to 99:59.9;
Default = 00:03.0.
LTP Fade * - The default LTP fade
time. Range 00:00.0 to 99:59.9;
Default = 00:03.0.
Colour * - The default action for the
colour fixture channels when outputting
a memory. Range: Snap or Fade;
Default = Fade.
Beamshape * - The default action for
the beamshape fixture channels when
outputting a memory.Snap or Fade;
Default = Fade
Position * - The default action for the
position fixture channels when
outputting a memory. Snap or Fade;
Default = Fade
Dwell - The default dwell time.
Range: 00:00.0 to 99:59.9;
Default = 00:00.0.
Trigger - The default trigger.
Go, Auto or Time; Default = Go.
Auto Increment - Automatic increment
of Next memory when programming.
Range: On or Off; Default = Off.
Exit - Select to return to the Desk
Defaults screen.
Submaster Defaults
Select the Submaster option from the
Desk Defaults screen and press the
ENTER key. The Submaster Defaults
screen is displayed on the main LCD:
*SUBMASTER DEFAULTS*
Sub Data: <Gen&Fix>
LTP Trigger: <On >
LTP Trig Lev: < 20>v
Use the up and down arrow keys to
move the cursor through the fields.
Use the + and - keys to adjust the
value in the selected field.
Sub Data * - Defines the channel data
that can be loaded directly onto the
submasters. Range Generics Only or
Generics + Fixtures ;
Default = Generics + Fixtures.
LTP Trigger * - Determines if the
submasters will trigger the LTP
channels or not.Range On or Off ;
Default = On.
LTP Trig Level * - The default LTP
trigger level. Range 0 – 100%;
Default = 5%.
Fade Up - The default HTP fade up
time. Range 00:00.0 to 99:59.9;
Default = 00:03.0.
Fade Down - The default HTP fade
down time. Range 00:00.0 to 99:59.9;
Default = 00:03.0.
LTP Fade * - The default LTP fade
time. Range 00:00.0 to 99:59.9;
Default = 00:03.0.
Colour * - The default action for the
colour fixture channels when triggered.
Range: Snap or Fade; Default = Fade.
Beamshape * - The default action for
the beamshape fixture channels when
triggered. Range: Snap or Fade;
Default = Fade
Position * - The default action for the
position fixture channels when
triggered. Range: Snap or Fade;
Default = Fade
Exit - Select to return to the Desk
Defaults screen.
6 - 2 Frog Series 73-750-00 Issue 6
Super User