Instruction manual

Transferring a Memory (1)
1. Press the MEMORIES button to
display the Memories screen on
the LCD.
2. Select a programmed memory.
3. Press and hold down the
TRANSFER WITH TIME (or
TRANSFER NO TIME) button on
the front panel.
4. Use the PAGE UP or PAGE
DOWN button to select the
required submaster page (if a
different page is required).
5. Press the appropriate
SUBMASTER FLASH button.
The selected memory will be
transferred onto the
corresponding submaster.
6. The Next memory on the
Memories screen will
automatically increment to the
next programmed memory.
7. To transfer this memory onto a
submaster, select the required
submaster page, then press the
appropriate SUBMASTER FLASH
button as before.
8. Repeat this procedure for each
memory to be transferred.
9. When all the required memories
have been transferred, release
the TRANSFER WITH TIME (or
TRANSFER NO TIME) button on
the front panel.
Transferring a Memory (2)
1. Press the MEMORIES button to
display the Memories screen on
the main LCD.
2. Select a programmed memory.
3. Press and release the
TRANSFER WITH TIME (or
TRANSFER NO TIME) button on
the front panel. The LCD Display
changes to the following:
Transfer With Time
Memory No: < 23 s>
Submaster: < 1-1 *>
[OK] {CANCEL}
4. Use the + and - keys or the
PAGE UP, PAGE DOWN and
SUBMASTER FLASH buttons to
select a submaster to transfer the
memory to.
5. Select the OK button by pressing
the ENTER key.
If the selected submaster is
unprogrammed, the memory will
be transferred onto the submaster
and the LCD return to the
Memories screen.
6. If the selected submaster is
loaded with channel data or has a
memory transferred onto it
already, a warning message is
displayed on the LCD:
***** WARNING ******
Submaster programmed
Overwrite submaster?
{Yes} {No}
7. To overwrite the submaster,
select the YES button by pressing
the ENTER key. The LCD returns
to the Memories screen.
8. To cancel the transfer operation,
select the NO button, then press
the ENTER key. The LCD returns
to the Transfer screen.
Editing Transferred Memories
Editing a submaster which has a
transferred memory results in editing
the actual memory.
1. Select a submaster with a
transferred memory.
2. Press the EDIT button on the front
panel. A warning message is
displayed on the LCD:
****** WARNING *****
About to Edit Memory
Continue ?
[OK] {CANCEL}
3. Press the ENTER button to select
OK and enter edit mode for the
actual memory transferred onto
the submaster.
NOTES
Transferring Memories - Method 1
When the TRANSFER WITH TIME or
TRANSFER NO TIME button is being held
down, the normal function of the
SUBMASTER FLASH buttons is disabled
(ie they do not flash or solo).
When a memory is transferred using this
method, any channel data or memory which
may already be on the submaster is
overwritten – no warning is given.
If the user presses and holds one of the
TRANSFER buttons, then releases it without
transferring a memory, the transfer operation
is cancelled automatically.
Transferring Memories - Method 2
If the user presses and releases one of the
TRANSFER buttons, the LCD will display the
appropriate Transfer screen as described
above. The following special cases apply to
this operation:
If the user selects the Cancel button and
presses the ENTER key, the transfer
operation is cancelled.
If the user presses the same TRANSFER
button, the transfer operation is cancelled.
If the user presses the other TRANSFER
button, the current transfer operation is
cancelled and the new transfer operation
actioned (ie the LCD screen changes from
With Time to No Time or vice versa).
Frog Series 73-750-00 Issue 6 5 - 5
Submasters