Instruction manual
Timed Crossfades
1. Set the A MASTER and B
MASTER to zero. Set the
CROSSFADE control to the fade
time required.
2. Set up a scene using the
PRESET A faders. Set up a
different scene on the PRESET B
faders.
3. Quickly move the A MASTER to
full. The scene on the PRESET A
faders will fade in and be output
live (the time taken to fade being
determined by the CROSSFADE
control). The red FADING light
flashes while the fade is taking
place, and goes out when the
fade is complete.
4. To crossfade to the scene on
PRESET B, quickly move the A
MASTER to zero and the B
MASTER to full. The scene on
PRESET B will fade in and the
scene on PRESET A will fade out
in the selected time. The red
FADING light will flash during the
crossfade.
5. A new scene can then be set up
on PRESET A without affecting
the outputs.
6. To crossfade to the scene on
PRESET A, quickly move the
A MASTER fader to full and the
B MASTER to zero. The scene on
PRESET A will fade in and the
scene on PRESET B will fade out
in the selected time. The red
FADING light will flash during the
crossfade.
Flashing Channels
When a channel is flashed, its level is
raised to that of the GRAND MASTER.
All other channels remain at their
current levels.
1. Ensure that the flash function is
set to Flash using the FLASH
FUNCTION button.
2. Use the SHIFT button to select
the required channels.
3. Press and hold down an individual
CHANNEL FLASH button. The
channel is added to the scene at
the level set on the GRAND
MASTER.
4. Release the CHANNEL FLASH
button. The channel returns to its
previous level.
Soloing Channels
When a channel is soloed, its level is
raised to that of the GRAND MASTER.
All other generic channels and fixture
brightness channels (if applicable) are
reduced to zero.
1. Ensure that the flash function is
set to Solo using the FLASH
FUNCTION button.
2. Use the SHIFT button to select
the required channels.
3. Press and hold down an individual
CHANNEL FLASH button. The
channel is soloed at the level set
on the GRAND MASTER.
4. Release the CHANNEL FLASH
button. The channels return to
their previous levels.
Frog Series 73-750-00 Issue 6 3 - 3
Preset Operation
Figure 3 - 3: Preset Controls