Instruction manual

Playing Back the Memories
The programmed memories are played
back in ascending numerical order
using the GO button.
Set the Playback X MASTER and the
GRAND MASTER faders to full.
If not already selected, press the
MEMORIES button to display the
Memories screen on the LCD.
Current: 1 s
Next: <2 >
Fade Up: <00:03.0>
Fade Down:<00:03.0>
Select memory number 1 or the first
programmed memory using the + and -
keys on the front panel.
Press the GO button. The outputs will
fade from their current levels to those
programmed into the selected memory,
using the transition times for that
memory.
While the crossfade is taking place, the
red light next to the GO button is on.
The Current and Next memories are
incremented automatically.
To output the next programmed
memory, press the GO button again.
Repeat until the end of the memory
stack is reached. Pressing the GO
button will then return to memory 1
(or the first programmed memory).
Playback Using Submasters
The SUBMASTER FADERS are used
to play back loaded channel data or
transferred memories.
Select the required submaster page
using the PAGE UP or PAGE DOWN
buttons as appropriate.
Move the appropriate submaster fader
to the level required.
If the submaster has zero fade up and
fade down times, the outputs from the
generic channels and fixture brightness
parameters are controlled manually.
The output levels are directly related to
the position of the submaster fader.
If the submaster has non-zero fade up
and fade down times, the outputs of
the generic channels and fixture
brightness parameters will fade up and
down according to the fade times for
the submaster.
If the channel data or transferred
memory contains fixture data, the
outputs will be as follows:
The Brightness fixture channels will
fade up and down in the same way as
the generic channels (see above).
If the LTP Trigger is enabled, the
Colour, Beamshape and Position
fixture channels will be triggered, and
snap or fade to their programmed
levels, when the submaster reaches
the LTP Trigger Level.
2 - 4 Frog Series 73-750-00 Issue 6
Quickstart Tutorial
Figure 2 - 4: Submaster and Playback X Controls