Instruction manual

Programming a Scene into a
Memory
Press the MEMORIES button to
display the Memories screen on the
main LCD.
Use the + and - keys to select an
unprogrammed memory:
Current: 1 s
Next: < 2 *>
Fade Up: <00:03.0>
Fade Down:<00:03.0>
Set the generic channel levels using
the PRESET A and PRESET B faders.
Set the fixture parameter levels to the
required values, as described earlier.
Press the PROGRAM button to store
all the current output levels in the
memory.
The ‘*’ next to the memory number on
the LCD display is replaced by an ‘s’ to
indicate the memory is now a
programmed scene.
The programmed memory becomes
the Current memory. The Next memory
automatically increments (if the option
is set in Desk Setup).
Current: 2 s
Next: < 3 *>
Fade Up: <00:03.0>
Fade Down:<00:03.0>
Programming a Scene onto a
Submaster
Press the SUBMASTERS button to
display the Submasters screen on the
main LCD.
Use the + or - keys to select an
unprogrammed submaster:
Submaster: < 2–3 *>
Contents: Empty
Set the generic channel levels using
the PRESET A and PRESET B faders.
Set the fixture parameter levels to the
required values, as described earlier.
Press the PROGRAM button to store
all the current output levels on the
submaster.
The Contents field on the Submaster
screen changes to Ch Data to show
that the submaster is now loaded with
channel data:
Submaster: < 2–3 d>
Name:
Contents: Ch Data
Fade Up: <00:03.0>v
Use the cursor keys to select the fade
times, LTP actions or LTP trigger level
field and adjust the value as required
using the + and - keys.
Transferring a Memory onto a
Submaster
Press the MEMORIES button to
display the Memories screen on the
main LCD.
Use the + or - keys to select a
programmed memory:
Current: 21 s
Next: < 22 s>
Fade Up: <00:05.0>
Fade Down:<00:05.0>
Press and hold down the TRANSFER
WITH TIME (or TRANSFER NO TIME)
button on the front panel.
Use the PAGE UP or PAGE DOWN
button to select the required page.
Press the appropriate SUBMASTER
FLASH button. The selected memory
will be transferred onto the submaster.
Release the TRANSFER WITH TIME
(or TRANSFER NO TIME) button on
the front panel.
Frog Series 73-750-00 Issue 6 2 - 3
Quickstart Tutorial
Figure 2 - 3: Memory Controls