Instruction manual

Programming
Page 96 Frog 2 Operating Manual – Issue 4.3
Fan First Mode
When several fixtures are selected and a fixture parameter is adjusted using a control
wheel, that parameter on each of the selected fixtures will increase or decrease by a
different amount
from their original values, depending on the fixture number. The value of
the first selected fixture will be locked. Example – Fan-First Mode (Fixture 1 locked):
Fixture Parameter Fixture 1 Fixture 2 Fixture 3 Fixture 4 Fixture 5
Original Value 10 10 10 10 10
New Value 10 15 20 25 30
Change in Value 0 +5 +10 +15 +20
Fan Middle Mode
When several fixtures are selected and a fixture parameter is adjusted using a control
wheel, that parameter on each of the selected fixtures will increase or decrease by a
different amount from their original values, depending on the fixture number. The value of
the middle selected fixture will be locked. Example – Fan-Middle Mode (Fixture 3 locked):
Fixture Parameter Fixture 1 Fixture 2 Fixture 3 Fixture 4 Fixture 5
Original Value 50 50 50 50 50
New Value 40 45 50 55 60
Change in Value -10 -5 0 +5 +10
Fan Last Mode
When several fixtures are selected and a fixture parameter is adjusted using a control
wheel, that parameter on each of the selected fixtures will increase or decrease by a
different amount from their original values, depending on the fixture number. The value of
the last selected fixture will be locked. Example – Fan-Last Mode (Fixture 5 locked):
Fixture Parameter Fixture 1 Fixture 2 Fixture 3 Fixture 4 Fixture 5
Original Value 50 50 50 50 50
New Value 30 35 40 45 50
Change in Value -20 -15 -10 -5 0