Instruction manual

Programming
Frog 2 Operating Manual – Issue 4.3 Page 85
Controlling Colour Parameters
The colour parameters of the selected fixture(s) are controlled using the control wheels.
First select the required fixture(s) and then press the COLOUR key.
The colour parameters for the fixture are assigned to the control wheels and are indicated
on the lower part of the touch screen.
If the fixture has more than three controllable parameters for the selected attribute,
pressing the attribute key will select the next group of parameters.
Controlling Beamshape Parameters
The beamshape parameters of the selected fixture(s) are controlled using the control
wheels.
First select the required fixture(s) and then press the BEAM key.
The beamshape parameters for the fixture are assigned to the control wheels and are
indicated on the lower part of the touch screen.
If the fixture has more than three controllable parameters for the selected attribute,
pressing the attribute key will select the next group of parameters.
Controlling Position Parameters
The position parameters of the selected fixture(s) are controlled using the control wheels.
First select the required fixture(s) and then press the POSITION key.
The position parameters for the fixture are assigned to the control wheels and are
indicated on the lower part of the touch screen.
If the fixture has more than three controllable parameters for the selected attribute,
pressing the attribute key will select the next group of parameters.