Instruction manual

Programming
Page 82 Frog 2 Operating Manual – Issue 4.3
Program Window – Values View
In the Program Window, when the [Values] option is selected, the fixtures and their
parameter values are shown as a table.
The currently selected fixtures are highlighted in yellow.
Fixture parameters which are tagged have an green background, untagged parameters
have a grey background.
When the [Percent] soft button is selected a drop down menu is displayed with the
following options:
• Percent – When this option is selected all the fixture parameter values are displayed
as percentages (ie 0 – 100% for both 8 bit and 16 bit parameters).
• DMX - When this option is selected all the fixture parameter values are displayed as
DMX values (ie 0 - 255 for 8 bit parameters or 0 - 65535 for 16 bit parameters).
• Details (%) – When this option is selected the fixture parameter values will be
displayed as the parameter detail names (eg Red, Gobo 1) where they are defined in
the fixture data. If parameter details are not defined, the window will show the actual
numerical values in %.
• Details (DMX) – When this option is selected the fixture parameter values will be
displayed as the parameter detail names (eg Red, Gobo 1) where they are defined in
the fixture data. If parameter details are not defined, the window will show the actual
numerical values in DMX (0-255 or 0 – 65535).
Program Window - Fade View
When the [Fade] option is selected on the touch screen or the Program Window, the fade
times of the fixture parameters are displayed in the Program Window.
Program Window - Delay View
When the [Delay] option is selected on the touch screen or the Program Window, the delay
times of the fixture parameters are displayed in the Program Window.
Program Window - Intensity View
When the [Intensity] button in the Program Window is selected, only the intensity
parameters of the fixtures in the programmer are displayed.