Instruction manual

Programming
Frog 2 Operating Manual – Issue 4.3 Page 81
Programming
This section of the manual covers the basic functionality of programming which involves
selecting fixtures, adjusting one or more of their parameters to the required values, and
then recording the information into a cue, palette, effect, UDF or UDK.
The Program Window
The Program Window is central to the programming functionality on the Frog 2 desk.
It is recommended (but not mandatory) that the Program Window is displayed on one of
the monitor screens when programming cues, palettes etc.
To display the Program Window press the [Program Window] key on the touch screen.
As fixtures are selected and their parameters adjusted, the corresponding information is
shown in the Program Window, for example:
Program Window – Values View