Instruction manual

Setup
Page 74 Frog 2 Operating Manual – Issue 4.3
Remote
Select the [Remote] option The MFKs and monitor window display the various Remote
options which are summarised in the following table:
Option Range Default Notes
Enable Remote Yes or No Yes
Enable Security Yes or No No
Only available when
Enable Remote = Yes
Password frogx
Only available when
Enable Security = Yes
Capture
The Capture visualiser has now been integrated with the Leap Frog 48/96 desk software:
Select the [Capture] option. The MFKs and monitor will then display the Capture options
which are summarised in the following table:
Option Range Default Notes
Enable CITP Yes or No No
Use DHCP Address Yes or No Yes
IP Address
The IP address to use if Use
DHCP Address is set to No
Subnet Mask
The Subnet Mask to use if Use
DHCP Address is set to No
Once a connection with Capture is established the Leap Frog can be selected as a DMX
source and your show can be visualised from Capture.