Instruction manual

Setup
Page 64 Frog 2 Operating Manual – Issue 4.3
Cue Stack Defaults
Press the [Cue Stack Defaults] key on the touch screen. The various options are shown on
the touch screen under four main sections (General, Chase, Trigger and Move on Dark):
General Options:
• Timecode – Range = Real Time, SMPTE, MIDI, CD; default = Real Time.
• Master Fader – Range = HTP Master, Manual Fader (1 Way), Manual Fader (2 Way);
default = HTP Master.
Chase Options:
• Chase Drive – Range = Auto, Bass, Manual, Beat; default = Auto.
• Chase Direction - Range = Forward, Backward, Bounce, Random.
• Chase Speed – Range = 0 – 200 bpm.
• Chase Fade – Range = 0 – 100%; default = 0.
• Chase Shots – Range = 0 – 255; default = 0.
Trigger Options:
• Trigger on Raise – Range = Enabled or Disabled; default = Disabled.
• Trigger Level – Range = 0 – 100%; default = 5%.
Move on Dark Options:
• Move on Dark – Range = Enabled or Disabled; default = Disabled.
• Delay – Range = 0 – 99:59.9; default = 3 seconds.
• Fade – Range = 0 – 99:59.9; default = 1 second.